Place an Immediate Temporary Abutment (The Immediate Temporary Abutment NobelReplace is only indicated for implant supported temporary single tooth restorationa.
Adjust the abutment
The abutment post is adjusted for height and clearance, as necessary.
The Plastic Coping (supplied with the Immediate Temporary Abutment) is tried in and relieved for clearance, as necessary.
Fabrication of Temporary
Fabricate a temporary crown with traditional methods using acrylic or composite.
Cement Temporary
Excess temporary cement is removed in accordance with normal procedures. Check occlusion.
Immediate Function - Multiple Restorations
Temporary Abutment Non-Engaging
Place an adjust Temporary Abutment Non-Engaging for height and clearance, as is necessary.
Fasten Abutments with guide pins that extend beyond the occlusion plane. Use Unigrip driver to connect.
Acrylic template
Fabricate acrylic template for chairside temporization.
Make access holes to allow guide pin to protrude.
Fill template with acrylic or composite and seat over temporary abutments.
Adjust Temporary Restoration
After seating, loosen the guide pins to remove the restoration.
Trim and polish the restoration. It is important to have a smooth surface adjacent to the surrounding soft tissues.
Connect Temporary Restoration
Connect the provisional reconstruction with the supplied abutment screws.
Using Manual Torque Wrench, with Prosthetic Adapter and a Screwdriver Machine Unigrip.
Check occlusion.
Two-Stage Delayed Function
The two-stage surgical procedure protects dental implants from inadvertent functinal loading by submerging the implants below the mucoa at the time of placement.
Use two-stage Delayed Function:
When a prolonged healing time is desired.
In compromised cases with decreased healing capacity.
When extensive and advanced grafting procedures are used.
Second-Stage Surgery Uncovering the Implant
Use Soft Tissue Punch or make separate incision to expose cover screw.
Remove cover screw using a Screwdriver Manual Unigrip.
Connection of Healing Abutment
Connect suitable Healing Abutment using Screwdriver Manual Unigrip.
Or if possible, connect the final abutment using corresponding Screwdriver.
